Maine Menu

_____________________

Great Water, Inc.
14 Maine St -Box 34
Brunswick, ME 04011
207 729 8500 TEL
517 813 6509 FAX

 

 

High output Alternators and Voltage regulators

 

 High Current Marine Alternator

Saddle mount show here.

Direct mount replacement for many marine engines. High output from alternator can be achieved on single standard engine belt and pulley.
  • 3 mounting foot configurations
  • 125-amp and 140-amp 12 VDC models
  • 75 amp 24 VDC models
  • SAE continuous rated output for high temperature bulk charging applications
  • Marine certified - complies with Coast Guard and BIA standard, Title33 CFR, Part 183, Sub part 1, section 183-410 (Ignition protected)
  • Isolated floating ground available on most models to protect against electrolysis
  • 6 x 50-amp high voltage diodes
  • 14-guage hand wound stator
  • Precision balanced rotor
  • Extended life copper composite brushes
  • Heavy-duty bearings with high temperature grease
  • 2 x 5/16" cable posts
  • Hand crafted in U.S.A

 

Model Type Price
AM-S075-e 75A 28V 2" foot $417.10
AM-S075Me 75A 28V 1" Marine foot $425.82
AM-S075Se 75A 28V saddle mount $467.36
AM-S120-i 120 14V 2" Gm/Ford int reg $329.01
AM-S120Mi 120A 14V Marine 1" foot $332.89
AM-S120Si 120 Amp, Saddle Mount $376.36
AM-S125-e 127A 14V 2" foot $345.13
AM-S125Me 127A 14V Marine 1" foot $355.56
AM-S125Se 125A 14V Saddle mount $394.82
AM-S140-e 140A 14V 2" foot $371.91
AM-S140Me 140A 14V 1" Marine mount $383.15
AM-S140Se 140A 14V Saddle Mount $425.46

Updated on 6/17/2008

 

Features

 

Benefits

 

The Details

High Output  from small case design.
140 Amp/14 VDC
75 Amp/28 VDC

   Small case alternator fits directly on many marine engines   This alternator will replace many stock alternators and provide efficient  charging rates.  Saddle mount Fits Most Yanmar Engines (and others).
"Cool Coil" hand wound Stators.   Higher sustanined current with cooler operation.   Stators are hand wound using 14 gauge magnet wire for high output and cool operation.
High performance recifiers.   High current capability with lower operating temperature.   Uses 6- 50 amp Motorola Diodes press fit into heat sink.  Battery terminals are nickel plated and bolted directly to the rectifier.
Precision machined components.   High current at all RPM and  long service life.   Rotors are precison balanced and fit with a narrow rotor/stator gap.
High quality materials.   Better performace and longer service life.   All alternators use copper composite brushes, Dacron Mylar insulators, ACRYFLEX-F insulated sleeving and "E" quality heavy duty bearings.

 

_________________________________________________________________

Great Water, Inc.
Contact us at Info@great-water.com

v02.08